How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9523
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

front panel fell off and shattered ,front panel part is w10570025,has

This answer was rated:

front panel fell off and shattered ,front panel part is w10570025,has 2controls snapped to it ,transformer control is behind those controls & came unplugged from something on front controls but I can't tell what. what part # XXXXX w10354053 plug in to. Thx,Rob

the multi plug from the transformer plugs into the OVEN user interface on the J1 connector

Whrlp Master Tech and 2 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

part # XXXXX user interface ? OK wait I found J1.It Has a 2" harness in it connected to the other UI

yes that is correct it connects to the microwave interface

Customer: replied 3 years ago.


PA4 OF UI #w10317350 connects to w10535008 @J1.Transformer cant plug same hole,plz help. Rob

Im sorry I had to blow the diagram up to see it better it is P1 not J1