How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

We own a Sumsung WF350ANRXAA washer. The door will not latch,

This answer was rated:

We own a Sumsung WF350ANRXAA washer.
The door will not latch, so the unit will not start.
Is there a way to adjust the door latch or to verify that the latch mechanism is the problem?

Hello, Thank you for using this service, I will be helping you with your problem today

Good evening, Okay you cant adjust these unfortunately. whats going on is the screw hole is stripped and the only way to fix that is replace the latch assembly.

Customer: replied 3 years ago.


How can remove the latch mechaism from the unit?

Give me a couple of minutes and I'll get you a video for that. be back shortly.
all of these switches go in the same way and heres a video to show you how its done. https://www.youtube.com/watch?v=g2cFmKJZY0M the switch looks different but the installs the same. heres a link to order the switch, http://www.repairclinic.com/PartDetail/Door-or-Lid-Latch-Assembly/8182634/1094190?modelNumber=WF350ANRXAA?RCAID=1000065 thanks and best wishes, Bryan.
Customer: replied 3 years ago.


giving it a try now.. thanks..

your welcome. if your real lucky you bay be able to put a different screw in it. wouldn't hurt to try !
Bryan and other Appliance Specialists are ready to help you