How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14031
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
21107370
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

Frigidaire hybrid range FPCS3085LF error code e032

This answer was rated:

Frigidaire hybrid range FPCS3085LF error code e032
Thanks for using this service. Please be logged in to rate my assistance when we are done. Rating 3-5 is good, but 1-2 is bad so talk with me first.

That code means that the 12 volt DC supply on the relay board is too low. Check all the connections on the relay board and if all is ok replace the power board. Here is a link to the low voltage power board.

http://www.repairclinic.com/PartDetail/Power-Supply-Board/316435703/1197079
Appliance Guru and 2 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Do you know where that circuit board is located? Is it accessible from the front?

Customer: replied 3 years ago.

Do you know where this board is located? Front accessible?

The diagram does not show clearly where it is, but on most of those units it is either sandwhiched between the console and top of the oven or on the bottom where the drawer slides out and it would be mounted to a back inner wall.
Customer: replied 3 years ago.

Thank you very much.

No problem