How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randy 43 Your Own Question
Randy 43
Randy 43, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3747
Experience:  20 yrs experience 18 in home,gas license , refrigeration expert
13202342
Type Your Appliance Question Here...
Randy 43 is online now
A new question is answered every 9 seconds

Maytag 3000 MCT will not start

This answer was rated:

Maytag 3000 MCT will not start

Randy 43 :

hello , do you have a model number ? does the machine make any noise at all? thx randy

Customer:

It only beeps when the start button is hit Mod:# XXXXX XXXXX

Randy 43 :

ok , so it has power but will not start ,does the door close ok? are there any error codes that come up ?

Customer:

Door closing OK no codes, no display

Randy 43 :

no display at all? have you tried unplugging for a few minutes to see if it resets ? or make sure the lock feature isnt on ?

Customer:

Yes to both

Randy 43 :

on the display when you power it up , you do not get any numbers at all ? just blank ? then you press start and it just beeps correct?

Customer:

Yes

Randy 43 :

the main control is getting power because it beeps ,if it is getting power then it should have a display , if no display then the main control is bad , but before you change that ,check that there are no broken wires to the board or bad connections on that board,otherwise the main control is faulty

Randy 43 :

Main Control Board W10248064       Main Product View
Full Size Image

Randy 43 : Main Control Board W10248064

Item #1549085 (OEM Part)


$223.75

Customer:

How do I get to it

Randy 43 :

take the top off , there are screws at the back pf the main top , hopefully it is not stacked ? dryer on top , slide the top backwards and then a few srews holding the control panel down

Customer:

Thanks

Randy 43 and other Appliance Specialists are ready to help you