How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 13425
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

We have just purchased a Fisher& Paykel rangehood from noel

This answer was rated:

We have just purchased a Fisher& Paykel rangehood from noel leeming. We havnt got it yet, but i need to know the height of the actual canopy not including the flue. The model is HC60PCIX2. I am a bit concerned, as oue ceilng is sloping and is only 2and a bit metres at that point. Maybe we should have bought a flat one. i chose this one as we live in an old cottage,But the istallers said the canopy must be 750 above stove top. Thankyou. April Jenkins
Thanks for using this service. Please be logged in to rate my assistance when we are done. Rating 3-5 is good, but 1-2 is bad so talk with me first.

Here are all the specs for the unit:
  • Overall height of product (mm) (adjustable) 648-1068mm
  • Overall width of product 600mm
  • Overall depth of product 450mm
  • Width of flue 220mm
  • Depth of flue 200mm
  • Height of control panel 32mm
  • Height of canopy rise (mm) 220mm
  • Size of air outlet 150mm


So the minimum with no flue would be 648mm

Appliance Guru and 4 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Im very satisfied with answer. If bench height 900, then 750 to bottom of flue or at least 700=1600, Ive only got 400 and need 648. I will have to see if I can exchange it wont I? Thanks April Jenkins

Related Appliance Questions