How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randy 43 Your Own Question
Randy 43
Randy 43, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3749
Experience:  20 yrs experience 18 in home,gas license , refrigeration expert
13202342
Type Your Appliance Question Here...
Randy 43 is online now
A new question is answered every 9 seconds

My Maytag Legacy Series #300 will not start and wont show

This answer was rated:

My Maytag Legacy Series #300 will not start and won't show a light on kind of wash. What could the possibilities be?

Randy 43 :

hi do you have any signs of power or lites anywhere on the DW? thx randy

Customer:

When you push heavy wash, Heated dry lights up.

Randy 43 :

ok , that means there is power , the problem is going to be the touchpad if some buttons do not respond , you can try turning the breaker off for a few minutes and see if it resets but if it does the same thing then the touch pad will need to be replaced

Randy 43 :

Touchpad and Control Panel - Part #(NNN) NNN-NNNNMfg Part # XXXXX
Full Size Image

Randy 43 :

 


Touchpad and Control Panel


Item #(NNN) NNN-NNNN/p>




Control pa


Manufacturer Number 6-920245


More



Randy 43 :

about $160

Customer:

Is it worth it or just buy a new dishwasher that won't have that go bad so fast. Are touch pad dishwashers not the way to go?

Randy 43 :

they dont normally go but that model unfortunately did have those issues, newer ones dont have the touchpad issues..

Randy 43 :

it depends on condition ,if you get it installed you are looking at $300..

Customer:

thank you!

Randy 43 and other Appliance Specialists are ready to help you