How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I have stove model {790.9220914}Oven Control Board XXXXXXXXX

Customer Question

I have stove model {790.9220914}Oven Control Board XXXXXXXXX will not work dead I REPLACE IT STILL DO NOT WORK?
Submitted: 3 years ago.
Category: Appliance
Expert:  Bryan replied 3 years ago.
Hello, Thank you for using this service, I will be helping you with your problem today. what was the problem in the first place that made you buy a control board ? What was it doing ?
Customer: replied 3 years ago.

the display went out no clock

Expert:  Bryan replied 3 years ago.
okay this is a power problem not the clock unfortunately.do you have a volt meter ?
Customer: replied 3 years ago.

i do

Expert:  Bryan replied 3 years ago.
okay p\perfect.. first thing you need to do is check the voltage at the back of the range. check power at the plug, you should be getting 220 volts to the range.
Customer: replied 3 years ago.

I have 220 volt the and all the surface burner work

Expert:  Bryan replied 3 years ago.
okay.do you have the back off ? your missing power somewhere going to the clock. trace the wires back and see if theres one burnt or off. we are having severe thunderstorms here so if I drop off line its because the power went out. its been flikering all day.
Customer: replied 3 years ago.

go to get back with you i am on call for work and my pager going off

Expert:  Bryan replied 3 years ago.
okay I'll try to find the wiring diagrams for you and we can talk later. thanks , Bryan