How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14498
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
21107370
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

My DD60D7 2 draw dishwasher has an error on the screen "E1"

This answer was rated:

My DD60D7 2 draw dishwasher has an error on the screen "E1" ....tried just turning it off and on a couple of times but no luck... Sounds like it is stuck on a cycle.....
Hello,

The E1 code is a door not closed code. Open the drawer and look at the right drawer frame and drawer right edge. There is a clear optics sensor on the frame and on the drawer edge. Use a Q-tip to clean the frame one as you have to get in the two holes and clean off the ones on the drawer then try it out.
Appliance Guru and 2 other Appliance Specialists are ready to help you
Customer: replied 4 years ago.
Hi, Thank you so much my dishwasher is working again....Megan