How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask The Home Smithy Your Own Question
The Home Smithy
The Home Smithy, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9619
Experience:  30 years repairing appliances
Type Your Appliance Question Here...
The Home Smithy is online now
A new question is answered every 9 seconds

I have a error code f01 on my maytag gas dryer and it wont

This answer was rated:

I have a error code f01 on my maytag gas dryer and it won't start
Hi. I'm Smitty. I am a professional appliance repair consultant here to help you diagnose, and repair, your appliance.
Getting the tech sheet from the manufacturer now. Please stand by.
Thank you.
Customer: replied 3 years ago.
Will you email a status to let me know how long it will take to analysis
Sorry for the delay.
The F:01 error code indicates a failed main control board.
From the tech information:
F:01 Primary Control Failure
F:01 flashes when there is a primary control failure.
Replace the machine control electronics.
One more minuet and I will get you parts and repair information.

Please click here to order the new control board.

If you scroll down on that page you will see to the right hand columb the instructions to install the new board.

Be sure to ground yourself properly as these boards are static sensative.

Please let me know if you have any other immediate concerns.
If not please select a positive rating at this time. Doing so will not close your question, and after you rate my service you may ask any followup questions you like. All at no additional charge.

Thank you.

The Home Smithy and 3 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.
Some additional information for you.
I am first getting the normal light reading that shows sensing wet then I continue to hold start button to see if its a delay due to size of load, then I get the f01 reading.

Related Appliance Questions