How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask kingcobra80 Your Own Question
kingcobra80
kingcobra80, Repair Technician
Category: Appliance
Satisfied Customers: 5645
Experience:  20+ years experience repairing/installing various appliances
32169475
Type Your Appliance Question Here...
kingcobra80 is online now
A new question is answered every 9 seconds

i have a kureg b-70.....and when i press start the water does

This answer was rated:

i have a kureg b-70.....and when i press start the water does not stop coming out
It sounds like the solenoid is stuck open or the switch itself could be bad. These are very difficult to take apart, especially without damaging the machine, so I would recommend contacting the manufacturer to locate a repair facility close to you. Ask for an estimate because sometimes the repair cost exceeds the value. The factory will also be able to tell you if it is under warrranty. Here is the contact info:
Call us 7 days a week, 7 a.m. - 12 a.m. EST
Toll-free:
866-901-BREW (866-901-2739)
Customer: replied 3 years ago.

OK thanks. however do you need special tools to open it up,.i am an automechanic, cant i just use a hammer..lol

The problem is the catches are in the upper portion and have to be pressed outward which is completely opposite than normal. Therefore damaging the outer case is almost next to impossible. There are a few videos on youtube if you want to watch them but even they damaged the case.
kingcobra80 and 2 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

holy moly . just checked you tube,.. i am suprised this thing cant fly..


i will just call them instead