How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My Whirlpool Duet Sport dryer is flashing"F01". What is the

This answer was rated:

My Whirlpool Duet Sport dryer is flashing"F01". What is the problem?

Hello, Thank you for using this service, I will be helping you with your problem today

Unfortunately the F01 is a bad error to get. its a primary control error.

F-01

flashes when there is a primary control failure. Replace the machine control

electronics.

Main Control Board W10111606       Main Product View the control is under the top of the dryer on the left side.

1 Unplug dryer or disconnect power.

2.

Remove the two rear screws from the

top panel, and slide the top panel to

the rear to remove. you can order this at the following link. http://www.repairclinic.com/PartDetail/Main-Control-Board/W10111606/1203139?modelNumber=WED8300SW2?RCAID=1000065 its around $236.00. sorry for the bad news, thanks, Bryan

Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions