How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

model wm26bbhnma front load washer keeps filling with water,

This answer was rated:

model wm26bbhnma front load washer keeps filling with water, the valves work water turns on and off. it fills then stops and starts filling again stops and starts again till water is half way up door.

Hello, Thank you for using this service, I will be helping you with your problem today

Good morning, the issue is with your water level control , Pressure Switch 6601ER1006E Main Product Viewthis is what shut the water off when it's done filling, before replacing this however check the rubber hose that runs from the tub to the control and make sure theres no small holes in it. these run by water pressure and if its not holding the water pressure it will start filling again. if you find no hole then replace the water level control. heres a link to the part. its around $20.00, http://www.repairclinic.com/PartDetail/Pressure-Switch/6601ER1006E/1268256?RCAID=1000065 you can see this with the top off the machine.

Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions