How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Replaced control module. Model #SHX46A05 UC/14 old control

This answer was rated:

Replaced control module. Model #SHX46A05 UC/14
old control module had heat burn (bad solder joint) in middle of circuit board.
Now the dishwasher acts as if it is not getting water or won't shut off?

Hello, Thank you for using this service, I will be helping you with your problem today.

does it sound like theres a pump running and running and running none stop ?

Customer: replied 4 years ago.

yes


 

okay this is stuck in whats called a flood mode. the machine thinks theres water in the base pan below the tub. what you need to do is pull the dishwasher out from under the counter and tip it for at about a 45 degree angle. put a towel in the front to sop up the water.once thats done try the machine again. there is a float underneath that kicks the pump in if it thinks theres water and the cycle will stop until the water is gone and the float resets.
Bryan and other Appliance Specialists are ready to help you