How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Man Your Own Question
Appliance Man
Appliance Man, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9896
Experience:  Appliance tech 4 years
Type Your Appliance Question Here...
Appliance Man is online now
A new question is answered every 9 seconds

frigidaire ATF8000 goes to pause

This answer was rated:

frigidaire ATF8000 goes to pause
Hello. Thank you for choosing Just Answer. I will be helping you with your question today.

Press the start button and the cancel button in at the same time for 5-10 seconds. Does the washer flash an error code?
Customer: replied 3 years ago.

Yes, E41

You need to replace the door lock. The door lock is easy to replace. Open the door. Then remove the metal band that hold the gray rubber gasket to the front panel. Roll the gasket into the washer. Now remove the screws that hold the lock onto the front panel.. slide the lock between the tub and the front panel and disconnect the wires.
Appliance Man and other Appliance Specialists are ready to help you

Related Appliance Questions