Hi Stewart,sure sounds like the heat relay has burnt out.When you open it is there HOT steam coming out?Please keep in mind,I am not there and need your input to correctly diagnose your problem.
I do not think it is as hot as normally when we open it.
Do the codes tell anything, Where is the heat relay located?
will be off line, thanks Sorry it took awhile to get your 1st reply
You diagnosed correctly. The printed circuit board was burned open where the relay was soldered. The new board has a larger relay. My concern is not about you but the program is not user friendly. It ask to comment and when I did I could never submit, it ask if I wanted be an expert, etc and only lead me in circles. I hope you can pass this info on. Thanks