How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Man Your Own Question
Appliance Man
Appliance Man, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9896
Experience:  Appliance tech 4 years
13888241
Type Your Appliance Question Here...
Appliance Man is online now
A new question is answered every 9 seconds

Jenn Air range - Model # XXXXX Received f5 error during

This answer was rated:

Jenn Air range - Model # XXXXX
Received f5 error during cleaning cycle; cancelled cycle before complete as a result.
Door unlocked at appropriate time, but fan will NOT shut off.
Now 6 hours later, oven completely cool, but fan still running.
When trying to turn oven on, it is registering that it is approx 350 degrees despite oven being cool, so in order for bake function to kick in must set at 400 or above, and oven will kick on but clearly will not heat properly.
Have tried shutting off at circuit breaker for 5 minutes, no luck in re-setting via that method.
Hello. Thank you for choosing Just Answer. I will be helping you with your question today.

You have a bad oven temp sensor and will need to replace it. The sensor is easy to replace. Open the oven door. Look at the back wall. You will see a metal shaft about 4 inches long. That shaft is the temp sensor. Remove the 2 screws that hold it on and pull the sensor forward then disconnect the electrical.
Appliance Man and 3 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Part number for the temp sensor?

Yes the pat number is 12001656
Customer: replied 3 years ago.

Thank you for your help!

Your welcome. Take care.

Related Appliance Questions