How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Man Your Own Question
Appliance Man
Appliance Man, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9896
Experience:  Appliance tech 4 years
13888241
Type Your Appliance Question Here...
Appliance Man is online now
A new question is answered every 9 seconds

My washing machine (Model GW712) gets halfway through the rinse

This answer was rated:

My washing machine (Model GW712) gets halfway through the rinse cycle then stops and continuously beeps until I turn it off. After many attempts to get it restarted on the rinse cycle it goes to the spin cycle but then stops. It sounds like it is pumping water out but as it tries to build up spin speed it whirs and stops. Does this sound like something that is repairable?
Yes this is repairable. It sounds lie the diverter valve is bad.
Customer: replied 4 years ago.

Is this something my husband can replace if I can source the part?


Are you able to assist with sourcing the part?

Customer: replied 4 years ago.

I have found a few diverter valves on line, could you please be a little more specific.

If your husband is handy then yes he can replace this. The diverter valve is on the bottom right back corner of the tub. If youu pull the washer forward about 2 feet then tip it back it will balance against the wall so you can work under it. The diverter valve has 3 hoses and 2 wires connected to it. The part number you need is 426862P
Appliance Man and 2 other Appliance Specialists are ready to help you