How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Man Your Own Question
Appliance Man
Appliance Man, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9896
Experience:  Appliance tech 4 years
Type Your Appliance Question Here...
Appliance Man is online now
A new question is answered every 9 seconds

How do I repair a sticking ice cube dispenser actuator

This answer was rated:

How do I repair a sticking ice cube dispenser actuator
Hello. Thank you for choosing Just Answer. I will be helping you with your question today.

This isnt to hard to do. Unplug the fridge.
First remove the drip try from the dispenser.
Then remove the 2 screws in the bottom of the dispenser panel.
Lift the up on the dispenser panel and pull out. Now remove the screws that hold on the dispenser assembly. Pull the dispense out and remove the rubber cover that you push to get water. Use some oil on the white slide and put it back together.
Appliance Man and 2 other Appliance Specialists are ready to help you

Related Appliance Questions