How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

Trying to remove the stove top of a Whirlpool Slide in stove

This answer was rated:

Trying to remove the stove top of a Whirlpool Slide in stove model # XXXXX so that I can replace the switch
Hello..It is my Pleasure To Be Working With You Today...On this unit you will need to slide the unit out..Then remove the screws which secure the top at each side of the oven..As there are screws under the cook top at the front which hold the control assembly from behind..To answer your question the screws at the side of the oven will need to be removed to gain access to the control.
Customer: replied 4 years ago.

Is it necessary to remove the 4 screws under the control panel (above the oven door) or is just the screws on the side that I need to deal with?

You will need to remove both To access.
Customer: replied 4 years ago.

I will check it out, thanks

Part #10 is where the screws are located at the back..

graphic
Bob L Your Appl Pal and other Appliance Specialists are ready to help you