How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14410
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
21107370
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

washing bowl runs out of alighment and is chewing into the rubber seal on the door I gess

This answer was rated:

washing bowl runs out of alighment and is chewing into the rubber seal on the door I gess it looks like the bearing is shot
Hello and thank you for using this service,

The issue you have is the rear support and bearing have failed, if you grab the lower edge of the inner tub you can probably lift it up 1/2" as there is a lot of play in the tub. This issue is very expensive to repair and generally exceeds the cost of a new one. The job is very involved and typically runs $600-800 to get repaired from a company. I wish I had better news for you.
Appliance Guru and other Appliance Specialists are ready to help you