How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6158
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

turned machine off because of bad vibration, now digital display

This answer was rated:

turned machine off because of bad vibration, now digital display will not come on?
You may have several issues here going on at once. Was the machine noisy when it was out of balance aside from the shaking noise itself? Bad bearings tend to make a screeching or roaring noise when in spin.
Customer: replied 4 years ago.

No large rug was spinning

The motor probably was overloaded with this heavy load and the fuse blew on the main board. the fuse is NOT replaceable- you need a new board to resolve it. I doubt anything came loose here, but you can check the wiring plug-ins anyway. Make sure to call up whoever you want to buy the part from with the full model and serial# XXXXX the unit as parts vary from what on-line look-ups show as this will ensure you get the right board.
Customer: replied 4 years ago.


Hit wrong face. Answer was helpful. should be happy face for GOOD service.


 


Thanks


 

You can hit happy face now- it is appreciated. thanks
MRANSWER and other Appliance Specialists are ready to help you
Customer: replied 4 years ago.

Wires going to control bd. were mashed together and shorted out.

thanks

Related Appliance Questions