Need Appliance Repair Help? Ask a Technician for Answers ASAP
yes the front is off and the drum is out
i put it back together to test it is venting cold air from the exhaust i put a damp shirt in it to test after a few minutes its not even close to warm is there a way to test the solenoids high temp thermostat of cycling thermostat
do you have any of the specs ?
im pretty sure those are not the rite reading
but i was looking for the second since the first tested good
the first one tested good the second had a reading of about 1310 ohm 1.31kohm i could not find the specs for it
now the high temp thermostat can i just unplug it to see if it is faulty ( dose it complete or interrupt a circuit)