How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JCCARVER Your Own Question
JCCARVER, appliance doctor
Category: Appliance
Satisfied Customers: 608
Experience:  25 years experience
Type Your Appliance Question Here...
JCCARVER is online now
A new question is answered every 9 seconds

my maytag clothes washer mah2400aww door wont lock. i replaced

Customer Question

my maytag clothes washer mah2400aww door won't lock. i replaced the door switch but still won't lock. when i push start it gives a "dl" code after approx. 10 seconds
Submitted: 4 years ago.
Category: Appliance
Expert:  JCCARVER replied 4 years ago.
Close the door firmly and press the "Power Off" button if the door does not lock when a cycle starts. Press the power button to clear error codes and restart the cycle.
Customer: replied 4 years ago.

i have done this already and it still gives "dl" code after i push start

Expert:  JCCARVER replied 4 years ago.
Try unplugging unit for 10 minutes see if it will reset the board
Customer: replied 4 years ago.

did it still get "dl" code

Customer: replied 4 years ago.

note that i have replaced the board and still get same code. could it be the emi filter

Expert:  JCCARVER replied 4 years ago.
DL is a door lock error

the only other thing I would suggest is the door sensor

Related Appliance Questions