Have a broken door lock on a front loading whirlpool washer model ghw9200lw. After a power outtage, door wouldn't open and I forced it open, breaking the inside latch. The part on the door itself is ok. What part # XXXXX I need to fix? How do I get inside to fix it?
Type of Appliance: Washer
Hi. I'm Smitty. I am a professional appliance repair consultant here to help you diagnose, and repair, your appliance.
Please click here to order the new latch assembly.
One more moment for the repair instructions.
The picture below will show you how to remove the lock.
Removing the top will also help. Three screws along the top back and the top comes off.
Thank you for trusting me with your problems. The Home Smithy
Please select a POSITIVE RATING (Ok Service or better) and a bonus is appreciated. This is how your professional receives credit for their time. If for any reason the rating box is not visible, or you are unable to enter a rating, please let your professional know. This is ment to be a running dialogue, and for this reason it is very IMPORTANT that you reply using the REPLY TO EXPERT tab if more informationis needed at any time BEFORE rating.Please remember to ONLY rate an answer when you are 100% satisfied. If you feel the need to rate Poor or Bad Service, please STOP and reply to your professional via the REPLY TO EXERT tab with the issue you have. They will be happy to continue further and do everything they can to provide you with the service you seek.
30 years repairing appliances