How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chas Your Own Question
Chas, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16407
Experience:  Maytag, Whirlpool, GE & Kenmore Factory Trained Service Tech
Type Your Appliance Question Here...
Chas is online now
A new question is answered every 9 seconds

Our whirlpool calbrio washer does not spin properly. Even

This answer was rated:

Our whirlpool calbrio washer does not spin properly. Even on low speed, loads become unbalanced and machine does not shut itself off as it should when becoming unbalanced. This washer is 5 yrs old. Did not do this in past. Any ideas?
Hi, my name is Chas, I am hoping that I will be able to help you with your problem today..

Thank you for using JustAnswer's for your appliance questions, Myself and all the other experts are anxious to help you with your problem today. If you will please explain your problem and the model and serial number we can get started...
Customer: replied 4 years ago.
Whirlpool cabrio WTW6600SW1
Ser CT4172977
Type 580

Becomes unbalanced in spin cycle washing loads not expected to become unloaded (whites, etc); no obvious differences in weights of wet load components? Happens almost every load even using spin speed of low.
You will need to replace the suspension rod set on the unit with updated part number W10189077, You can order the parts you need from the following places,,,, or, all of these places offer easy returns and reasonable prices for their items.


Here is a video on how to do it

Chas and 3 other Appliance Specialists are ready to help you
It takes me about 30 minutes to do the repair, especially if you watch the video on how to do it..
Customer: replied 4 years ago.

I did respond. Not sure why you didn't receive it.

We bought the kit and replaced the rods. It was do-able, but not easy! That
washer drum is heavy, and it's hard to thread the rods thru the bushing. Esp
with all the grease, it's hard to keep a good grip.

Thanks for your help. We tried to get a service tech to come to our house,
but he couldn't hit a 5-hr time slot. Ended up wasting an entire day waiting
on him to show!

Thanks again,

I am glad you were able to get it done, Have a great day!!!

Related Appliance Questions