I got a GE Adora washer. Today it does not respond to the control panel. When I set it to spin, I can hear the sound. However I don't see anything spin. Please advise
Type of Appliance: Washer
Hello I'm Larry and I will use all my training and knowledge of 40 years to help you with your Problem today ,, thankswhen it fills will it wash?
you can hear the pump pumping out but the tub does not spin?
That is correct. I thought it could be the belt broke. However I could not find the belt for the spinning barrel. All I can find is, at the bottom, the little belt driving the washing hand.
the same belt controls both, the break assembly is bad and its part of the transmission on this unit and you will have to replace the complete transmission which will cost about $400 for the part and labor, you will have to use a service tech to do this because of special tools needed for the repair ,,, sorry for the bad news but i'm Glad i could help you with your problem so please leave me a positive rating of one of the top 3 smiley faces for me before you leave for my time and knowledge, if you cant leave a positive rating then please do not leave one at all, a lower rating counts against us ,, thanks
sorry but i could not make out what you wrote except the part about the break ,,
Over 35 years of in home appliance repair and service