How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Our LG Refrigerateur model is LRSC26923TT. our ice despensor

This answer was rated:

Our LG Refrigerateur model is LRSC26923TT.

our ice despensor is crushing ice when it is set on cube how do we repair it.

[email protected]
Hello, Thank you for using this service, I will be helping you with your problem today

when you change this from cubed to crushed and press for ice do you hear the solenoid in the freezer make a clack noise? this is what switches this from cubed to crushed.
Customer: replied 4 years ago.
Don't hear anything
okay when you pull your auger out you will see the rod (metal) that runs along the bottom, this slides into a whole in the back of the freezer , thats where the solenoid is. the solenoid is part # XXXXX on this diagram. leave the auger out and push the light switch that controls the lights inside the freezer in and then push for ice. does the solenoid move ?you can see it through the back inside the freezer.
Customer: replied 4 years ago.
Does not move
okay do you have a multimeter ? you need to know whether its getting voltage or if the solenoid is bad, do you think you could check it for voltage ?
Customer: replied 4 years ago.
No we do not have a multimeter
okay, can you stick your finger in where the rod goes and see if the solenoid moves freely with your finger ?
Customer: replied 4 years ago.
Sorry we called a service man to come fix the ref. Thank You.
okay, sorry, i tried, its just I didn't want to give you bad info and have you order something that you may not need. it could be the solenoid or the dispenser control. have a great day, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions