I am replaceing new soap dispenser on a Kenmore dishwasher how do I remove the old one.
Brand: kenmore pt#W10224429
Type of Appliance: Dishwasher
not A thing
Thanks for counting on us to help with your appliance problem! My name is XXXXX XXXXX X look forward to helping you! Open the Dishwasher door and remove all of the screws from the inner door and separate the door panels. There are six 3/16" screws on the back side of the dispenser assembly and the wires. Remove the screws and disconnect the wires, press the small release tabs to allow the dispenser to come out. Install the new dispenser, reattach the wires and install the screws. Reinstall the door panel and you are good to go! Please let me know if you need more detail.Rating my answer "Got the Job Done" or higher is the only way I receive credit for helping you. If you need additional help or clarification, please let me know before rating my answer. I will work to earn your highest rating! You may refer back to this question for as long as necessary after rating, AT NO ADDITIONAL CHARGE, until your problem is resolved.KellyKelly41081.9978885417
Highly accurate diagnostician with over 30 years experience!