How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

how do i put ge washer wbvh6240fww in tech mode or troubleshoot

This answer was rated:

how do i put ge washer wbvh6240fww in tech mode or troubleshoot mode.

Hello, Thank you for using this service, I will be helping you with your problem today

This is how you put this in test mode.

Press power button to clear any current cycles.

Note:

The display must be blank to proceed.

Disconnect the power for 30 seconds.

Reconnect power and within 30 seconds of

reconnecting power:

Press signal button.

Press delay start button.

Press signal button.

Press delay start button. (The door will lock,

then will display t01.)

Bryan and 5 other Appliance Specialists are ready to help you
Can you tell me the issue with this machine ?
Customer: replied 4 years ago.
it was drain plug clogged, send me accept button
okay great you got it fixed ? good job ! thanks and have a wonderful weekend. Bryan

Related Appliance Questions