How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have whirlpool quiet two dishwasher, normal light is.on hi-temp

Resolved Question:

I have whirlpool quiet two dishwasher, normal light is.on hi-temp light blinks
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.
Hello, Thank you for using this service, I will be helping you with your problem today

can you count the blinks? do you have the model # ?
Customer: replied 5 years ago.
The normal light stays on the hi temp light continually links can't find model number
Expert:  Bryan replied 5 years ago.

Ok you need to try and reset the control board. Press "high temp scrub, energy saver dry, high temp scrub, energy saver dry, high temp scrub, energy saver dry, high temp scrub, energy saver dry"

All the lights will go solid at which point you press cancel to reset the board.

**NOTE** if you don't have a "heated dry" button, use the "air dry" or "energy saver dry" button instead.

Customer: replied 5 years ago.
Only have hi temp wash and heated dry no energy saver or.hi temp scrub
Expert:  Bryan replied 5 years ago.
have you tried shutting the power off to it for 5 minutes and see if it resets ?
Customer: replied 5 years ago.
I will try, I also believe I founf ther Model # XXXXX
Expert:  Bryan replied 5 years ago.
okay. I'll look up the model while you try that.
Customer: replied 5 years ago.
Shut breaker off, five minutes, hi-temp light back on blinking non stop
Expert:  Bryan replied 5 years ago.

okay its not good news, it means the main control board has failed. you will need to order and replace the board. this is located inside the door. remove all the screws around the inside of the door and lift the panel up to access this. theres a link below to order it.

control board-- http://www.repairclinic.com/PartDetail/Main-Control-Board/8564546/1060956?modelNumber=DU1100XTPB3 sorry for the bad news, thanks Bryan

Bryan and 2 other Appliance Specialists are ready to help you