How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 77734
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I HAVE A WHIRLPOOL WASHER MODEL WTW57ESVW1 IT GOES INTO THE

Resolved Question:

I HAVE A WHIRLPOOL WASHER MODEL WTW57ESVW1 IT GOES INTO THE LAST CYCLE AND SPINS OUT THEN WATER STARTS FILLING THE MACHINE AND IT STARTS AGITATING
Submitted: 4 years ago.
Category: Appliance
Expert:  Tyler Z. replied 4 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

This is a common failure for this model washer and unfortunately there is no way to "reset" the issue. The pressure sensor switch inside the control panel has failed and it's agitating to early instead of holding off until the tub is full of water. Below is a link to the pressure sensor switch you'll need to order and replace.

CLICK HERE
Tyler Z. and 3 other Appliance Specialists are ready to help you