How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

I have a model MED6600TQ0 dryer. It displayed the AF code,

Resolved Question:

I have a model MED6600TQ0 dryer. It displayed the AF code, now it will not start. Power appears to be correct, just won't start.
Submitted: 4 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 4 years ago.
Hello I'm Larry and I will use all my training and knowledge of 40 years to help you with your Problem today ,, thanks

AF means you have an air flow problem. Disconnect the vent hose from the back of your dryer and run a normal cycle. If it still gives you the error code then you have a bad control board, otherwise you need to clean your vent through the house.
Customer: replied 4 years ago.
I am not getting the AF error code, but it still will not start.
Expert:  Appliance Tech Larry replied 4 years ago.
so the error code does not come up any longer but the dryer will not start now?
Appliance Tech Larry and other Appliance Specialists are ready to help you
Customer: replied 4 years ago.
That is correct.
Expert:  Appliance Tech Larry replied 4 years ago.
you will have to replace the control board then and its part number W10051167 which cost about $122 and you can get it at a local appliance parts dealer near you ,, thank you