How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74352
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a maytag washer model # XXXXX and it keeps showing

Resolved Question:

I have a maytag washer model # XXXXX and it keeps showing a F 06 code and I have had a repair person out 3 times and now he says its going to need a computer. Any thoughts
Submitted: 4 years ago.
Category: Appliance
Expert:  Tyler Z. replied 4 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

F06 means that your motor control board isn't reading the tachometer on your motor correctly when it tries to turn the motor.  You'll need to remove the lower front panel and make sure all the wire connections are secure to the motor control board (MCU) and if everything looks good, the MCU will need to be ordered and replaced.  The MCU generally costs about $200 for the part, but it only takes about 20 minutes to replace.
Customer: replied 4 years ago.
where can I order this part from
Expert:  Tyler Z. replied 4 years ago.
You can order the part from the link below.

CLICK HERE

Customer: replied 4 years ago.
thank you I have ordered the part you have suggested and I am hoping it works.
Expert:  Tyler Z. replied 4 years ago.
no problem and good luck to you.
Tyler Z. and other Appliance Specialists are ready to help you