How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

my LG Dishwasher is displaying a problem signal E 1 model :L

This answer was rated:

my LG Dishwasher is displaying a problem signal E 1 model :L D-14AW3 is this easy to fix as we live remote many thanks Peter
Hello, Thank you for using this service, I will be helping you with your problem today

E-1 means the water level not reached after 10 minutes of fill time.
The Water Supply Tap is closed.
The Water Supply is shut off.
The Inlet Hose is kinked.
The Water Pressure is very low.
(below 10 psi)
Inlet Valve is OK?
The filter of Inlet Valve is clogged
by impure water.



Remove the cause of kink or block.
Check the wiring connections
Measure the electric resistance of
Inlet Valve. (950-1300 ohms )
Clean the filter of Inlet Valve.


theres a lot of things that can cause this. check your water supply for good pressure.
Customer: replied 4 years ago.
thanks Bryan I have done all of above except the inlet valve it does have water flow in for approx one minute approx 3 liters then goes to e1 and pumps the water out
all you can do is check the valve right now. sounds like the water flow isn't enough and its shutting down and draining.
Bryan and other Appliance Specialists are ready to help you
.

Related Appliance Questions