I have a Whirlpool Quiet Partner II Dishwasher that was running fine until today - when I push the start button after setting it for a normal load and heated dry (my usual settings) nothing happens. Help! It normally starts right up and it is not making any sounds; the normal load and heated dry buttons light up, but nothing else happens
Optional Information: Brand: Whirlpool Quiet partner II dishwasher Type of Appliance: Dishwasher Already Tried: anger repeatedly pushing buttons cursing making sure door clicked shut as usual more anger
Hello I'm Larry and I will use all my training and knowledge of 40 years to help you with your Problem today ,, thanksdoes any of the lights still come on?
all of them except the start when i push normal load and heated dry they both come on
tell me please what all the buttons on the control panel say from left to right ,, thanks
pots and pans, normal, light , rinse only, high temp wash, sani rinse, heated dry, delay, start/resume, cancel/drain
to reset the board press these buttons in this order ,, thanks high temp wash - then - heated dry,high temp wash - then - heated dry,high temp wash - then - heated dry,,
Experience: Over 35 years of in home appliance repair and service