front load Affinity washer will go through the complete cycle until it gets to rinse cycle, it will not spin, will drain water out, but will not spin, it does spin during the wash cycle
Optional Information: Brand: Affinity front load Frigidaire Type of Appliance: Washer Already Tried: checked to make sure filter was not stopped up, will spin in wash cycle and go through rinse cycle until spin
Hello I'm Larry and I will use all my training and knowledge of 40 years to help you with your Problem today ,, thanks
What Happens Now?Your chat has ended, but you can still work with your Expert to get an answer to your question if you have not yet received one.Come back to this page at any time to see additional information from your Expert. You will also receive an email when your question is updated. If you want to send a message to your Expert, use the box below.If you have already received a satisfactory answer to your question, click the Accept button above. Experts are credited for each accepted answer they provide.
may i have the model number please
LTF6000ES1
replace the system control unit and its just inside behind the lower front panel on the base of the washer, its part numberNNN-NN-NNNNwhich cost about $151 and you can get it at a local appliance parts dealer near you
Experience: Over 35 years of in home appliance repair and service