Hello I'm Larry and will use all my training and knowledge to help you so please stay on line with me until we finish ,, thanks
trying to understand ths ,, did you replace the pump?
its still coming up with nd code?
and door is locked will not run any cycle.
it didnot drain all the water out.
you still have a blockage in the drain either from the tub to the pump or from the pump to the drain pipe, the drain hose can also be to far down into the drain pipe and be causing this and to unlock the door you will remove the screws from the back of the top, pull the top back and off, reach down to the door lock and pull in the release to unlock the door and open it
ok will pull apart and check all out
Glad i could help you with your problem so please press the accept button before you leave for my time and knowledge ,, thanks