How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a kenmore Ultra Wash Quiet Guard 4. The cycle status

Resolved Question:

I have a kenmore Ultra Wash Quiet Guard 4. The cycle status indicator is stuck on "clean'.
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

 

can you get us the full model # ? also is the clean light blinking ? if so how many times ?

Customer: replied 4 years ago.
Kenmore Ultra Wash Quiet Guard 4 blinks constantly++++++++++++++++++++++++++++++++++++++++++++
Expert:  Bryan replied 4 years ago.

try followed the below steps to reset and the Dishwasher is functioning normal again.
1. Heated Dry
2. Normal Wash
3. Heated Dry
4. Normal Wash
5. Heated Dry
6. Normal Wash
7. All lights lit now.
The dishwasher will function properly.

Customer: replied 4 years ago.
still not working all lights did not light up. do you want me to hit heated dry and normal wash at same time or individually?
Expert:  Bryan replied 4 years ago.
individually back and forth . heated dry then normal wash, then heated dry . like that.
Customer: replied 4 years ago.
it seems to be cycling thru,what if it freezes up again?
Expert:  Bryan replied 4 years ago.
it should be fine. sometimes the boards scramble and need to be reset, keep the info handy for future use just in case. come back if you need more help. thanks Bryan
Customer: replied 4 years ago.
I had a follow up question, what do I do if it freezes up again?
Expert:  Bryan replied 4 years ago.
if it freezes up again your main control board is bad. it would need to be ordered and replaced. hope this helps, thanks Bryan
Customer: replied 4 years ago.
One more question and I'll let you go, it has cycled thru and all the lights are out to include the blinking clean - is that a good sign?
Expert:  Bryan replied 4 years ago.
yes it means it went through the cycle and shut off like its suppose to. this should start correctly if you try another load of dishes now. (if you have some ready) looks like its all set. thanks, Bryan
Bryan and other Appliance Specialists are ready to help you