How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I select the cycle on my Kenmore H4 gas dryer and push start

This answer was rated:

I select the cycle on my Kenmore H4 gas dryer and push start button and it only beeps, I did just replace the dryer belt. What could be the problem?
Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

can you get us the full model # ?
Customer: replied 4 years ago.
Model 110.95862402
Customer: replied 4 years ago.
Model 110.95862402, the dryer just stopped running, would choice cycle and push start and it just beeps and not run. When I opened the bottom panel, noticed belt was broken. I replaced it and it still does not start when cycle is chosen and start pressed.
okay the problem is with the belt switch at this point. its either not in the right position or the belt isn't on the pulley correctly. this is a safety that stops the dryer is the belt breaks. its # XXXXX on this diagram . check the switch and make sure its engaged.
Bryan and other Appliance Specialists are ready to help you