My ice maker on my Kenmore Side by Side model 52203100 is not getting water. The water dispenser on the fridge works fine. I tested the solinoid valve that supplies the ice maker with the dispenser connector and it works fine. It looks like the valve is not getting the voltage to open the valve. Any suggestions?
Type of Appliance: Refrigerator
Tested water supply solinoid for ice maker and works fine. but not getting voltage from ice maker?
Hi. Welcome to JustAnswer.
Most times when the ice maker is not sending voltage to the valve it is a bad ice maker.
Give me a couple minuets to see if there are any diagnostics you can do to confirm that it is the ice maker.
What are the first three numbers of th emodel number? They are kind of small and may be hard to see..
30 years repairing appliances
I need the first three numbers of the model number. They are small and may be hard to see.
522 for the fridge, not sure where to find number for ice maker.
If the complete number is XXXXX then I am sorry but that is not a valid model number. Please check it again.
Sorry. The number 522.03100 isnt good either.
Please check it again.
Sorry, It's 106. 52203100
Please click here to download th eservice manual for the ice maker.
On page one you will see th etesting procedure in th eright hand columb. Jumper the test points and see if th emotor will run. If it does not run replace th ewhole unit. If it does run follow the procedure and you will see when the unit should call for water. If it doesnt call foe water then again replace the whole unit.
The rest of the rep[air and diagnostics are in the manual. A little reading and you will be able to repair and diagnose the unit with no problems.