Recent Feedback
I have a F&P dishwasher and it is stuck on some cycle. I cannot get it to change.
Optional Information: Brand: Fisher & Paykel Type of Appliance: Dishwasher Already Tried: Pressing power button for a continued amount of time
Hello, and thank you for using this service. I'll be helping you with your problem today.Do you have the model number so that I can better assist you? If you open the top drawer it should be located in the lower front left corner on the frame of the dishwasher.Also, are you saying that the dishwasher will not run at all right now and you can change any selections?
It will run on a 5 minute cycle. It is stuck on that.
I cannot find a model number on the lower left side.
The LCD sceen is just going crazy and flashing with various symbols.
OK so try to just unplug the dishwasher or turn the circuit breaker off for 60 seconds to see if the electronics will reset. If that doesn't work, then your control board inside the front panel of the drawer will need to be ordered and replaced because it's just shorted for one reason or another.
Experience: 7+ years being an appliance technician with factory training