How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have Maytag MSD2756G after I reinstalled the doors the fountain

Resolved Question:

I have Maytag MSD2756G after I reinstalled the doors the fountain panel is completeluy out I have double check the connections and everything is correct any ideas
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.
Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

you need to check the plug at the bottom of the freezer door where it connects , are any of the wires broken or the plug loose ? do you have a volt meter?
Customer: replied 4 years ago.

I checked the wires at the top of the door ther are no wires on the bottom all I have is test light

Expert:  Bryan replied 4 years ago.
okay the diagrams weren't to good on this. are you getting power at the top where the plug is?
Customer: replied 4 years ago.
yes
Expert:  Bryan replied 4 years ago.

you need to open the dispenser and check power to the dispenser control board. if its getting 120 volts then the board has failed and needs to be replaced. theres a link below to the board,

 

control .

Bryan and 3 other Appliance Specialists are ready to help you

Related Appliance Questions