How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

What color is the power wire to the icemaker in a maytag mzd2768ge? There are 4 wires the

Resolved Question:

What color is the power wire to the icemaker in a maytag mzd2768ge?
There are 4 wires there, we need to find the one that will activate when the icemaker fires off a duty cycle.
I need an answer within about 5-10 minutes max.
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.
Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

heres the wirring diagram for the whole refrigerator, are you trying to cycle this ? trying to start a harvest cycle ?
Customer: replied 4 years ago.
Trying to measure duty cycles, actually. We are leaving a measuring device in place that needs to register every time the icemaker has a harvest cycle.
Expert:  Bryan replied 4 years ago.
okay,okay, the best way to do that would be to go to the ice maker module motor not the inline power which woul be constant. the best way to do that is pop the front white cover off the ice maker and you will see this, the whole that has an M is the motor, heres a backside view of the module if that can trace it from there.
Bryan and 4 other Appliance Specialists are ready to help you
Customer: replied 4 years ago.
So it looks like, from the wiring diagram, the constant power to the motor is the red wire and the actuation comes down the tan wire?

Neither the tan nor the red wire are registering current right now with an amp clamp, as one would expect.
Expert:  Bryan replied 4 years ago.
thats correct. try testing the V on the module to a natural and you should get 120 volts.

Related Appliance Questions