How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Peter Your Own Question
Peter, Home Appliance Technician
Category: Appliance
Satisfied Customers: 559
Experience:  Over 25 years in the home appliance service and parts industry.
Type Your Appliance Question Here...
Peter is online now
A new question is answered every 9 seconds

Changing Handle on mmv5207bas microwave. Got the door off.

Resolved Question:

Changing Handle on mmv5207bas microwave. Got the door off. How do I get to the screws?
Submitted: 4 years ago.
Category: Appliance
Expert:  Peter replied 4 years ago.

Peter :

Hi, my name isXXXXX am eager to help you solve your appliance problems. There is a plastic trim on the inside of the door. Use a putty knife on the inside edge of the trim, insert it and slowly lift up on the handle and the trim will come loose, start at a corner and work wour way around about every 3 inches. Once the trim is loose you can get to the screws.

Peter :

You may send additional questions directly to me.

If I have answered your question satisfactorily - please press the "ACCEPT" button, as this is the only way I receive pay for my knowledge and time.
Bonuses are GREATLY appreciated as well as feedback.

Thank you,



Do I do it with the door on or off the unit?

Peter :

I usually do it without removing the door but it does not matter.


just pry it up? anything gonna snap and break?

Peter :

if you put the putty knife on the inner edge and slowly lift up on the handle of the putty knife you will feel the clip release and the plastic will come away from the inner door.

Peter and 4 other Appliance Specialists are ready to help you

Related Appliance Questions