How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a frigidaire crown dryer.model #crer57-00as1 dryer runs

Resolved Question:

I have a frigidaire crown dryer.model #crer57-00as1 dryer runs but no heat is present.duct is clear.
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.
Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

there is no heat at all ? do you have a volt meter?
Customer: replied 4 years ago.
no heat at I do not have a volt meter
Expert:  Bryan replied 4 years ago.
okay on this dryer its always the element. let me look up the correct element and get you a link to the part, I"ll be back shortly, thanks Bryan
Expert:  Bryan replied 4 years ago.

okay, there are two ways to do this , one replace the whole element and heater assembly at around $70.00 or you can restring the element. restringing is around $48.00 but getting the whole element is easier. here a link to the whole element.


and heres a link to the restring kit .


both have a video to show you how to replace it. thanks Bryan

Customer: replied 4 years ago.
also dryer squeels.could this be the belt?Is heating element and belt easy to install?
Expert:  Bryan replied 4 years ago.
yes actually the reason the dryer is squealing is because of the back bearing that holds the drum is bad. that lets the drum sag also and can short the element . the belt wouldn't cause the squeal. this is the rear bearing . you will see it when you replace the element, here a link to that part with video. the bearing runs around $22.00.
Bryan and other Appliance Specialists are ready to help you
Expert:  Bryan replied 4 years ago.
is there something else i can help you with ? i I see the answer is not accepted and still open. let me know thanks , Bryan

Related Appliance Questions