The F2 error is saying that the relay board is bad(if your unit has one). I am pulling the tech guide right now so I can take a look.
Your unit does have a relay board on it. It is number 29 in the picture below.
12001691R is the part number for a rebuilt board. They are rebuilt because they are no longer made.
If you have a voltmeter I would recommend that you pull the oven sensor and test it, at room temperature, to get an ohm reading.
The oven sensor should read between 1080-1110 at room temp when they are good.
sounds like a new stove to me
That board is kinda pricey. Almost 200 dollars.
I don't know how much the new downdraft range would cost.
No problem. Is there anything else I can help you with?
no will see what I can get done out here
Those things are high aren't they.