How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6160
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

Frigidaire dishwasher water not hot enough? Model # XXXXX

Resolved Question:

Frigidaire dishwasher water not hot enough? Model # XXXXX Installed OCT.22 2010 Reused copper water supply line from previous unit, drain tube loops under sink from excessive material, water is luke warm when opening as to add a plate, cup ect. is this to soon ?
Submitted: 5 years ago.
Category: Appliance
Expert:  MRANSWER replied 5 years ago.
The dishes are going to absorb heat out of the water here as the dishwasher does not use that much to begin with. I would say you have nothing to worry about here as long as you run your sink before starting the unit to ensure you do wash with hot water. The water that fills the unit only goes thru an inlet valve- nothing mysterious happens to it.
MRANSWER and 3 other Appliance Specialists are ready to help you