Recent Feedback
MAY TAG NEPTUNE one dryer fin is loose need to get dryerlid off so can tighten up
Optional Information: Make: may tag Model: neptune Already Tried: not much
Hello, and thank you for using this service. I'll be helping you with your problem today.Do you have a model number so that I can better assist you? It should be located on a sticker and can be seen if you open the door.
model number is XXXXX
OK so below is a link to a video that shows you how to remove the front panel. Once the front panel is removed you can remove the screws going into the metal brackets holding the top panel down. That will allow you to hinge the top panel up and backwards so that you can tighten the bolts down into the tumbler.CLICK HERE
Experience: 7+ years being an appliance technician with factory training