How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

whirlpool electric range model rf366pxgt the heat control dont

Resolved Question:

whirlpool electric range model rf366pxgt the heat control dont control the burner right. i have replaced the burner control, but that did nothing the burner works the same way. the burner gets hot and stays on. this is the large front burner. the rest of the burners work just fine.
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


If you replaced the infinite switch (burner switch) it's going to be burner itself that's bad, the burner has a sensor in it and it is bad. The sensor is the Rod running down the center of the burner in this picture, unfortunately you cannot order just the sensor you have to replace the burner, this will fix the issue, thanks, Bryan

Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions