How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

We have a Maytag Ensignia washer that has stopped working on

Resolved Question:

We have a Maytag Ensignia washer that has stopped working on the cold/cold setting. The washer is about 7 years old.
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


Can you get me the full model number? Is it still putting hot water in ?

Customer: replied 4 years ago.
Hot and warm water settings work fine. Only cold doesn't work, on cold/cold or A.T.C. cold. The model is MAV6457AWW.
Expert:  Bryan replied 4 years ago.
Okay, your fill valve has failed, you will need to order and replace it, you can order this at the following link. fill valve this will take care of your problem, it's located right where your fill hoses connect, before replacing it however check the screens in your hoses and make sure those are clear, it's rare but sometimes a hose can clogged and not allow water to flow into the valve itself, if they are clear replace the valve, thanks, Bryan
Bryan and 5 other Appliance Specialists are ready to help you
Customer: replied 4 years ago.

Related Appliance Questions